MLD1N06CLT4
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -50°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | SMARTDISCRETES™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Voltage - Rated DC | 62V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MLD1N06C |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 40W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Rise Time | 4ns |
| Drain to Source Voltage (Vdss) | 62V |
| Fall Time (Typ) | 3 ns |
| Turn-Off Delay Time | 4 ns |
| Continuous Drain Current (ID) | 1A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 10V |
| Voltage - Load | 59V Max |
| Drain Current-Max (Abs) (ID) | 1A |
| Drain to Source Breakdown Voltage | 59V |
| Avalanche Energy Rating (Eas) | 80 mJ |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 590m Ω |
| Drain to Source Resistance | 750mOhm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MLD1N06CLT4 Overview
The LED driver's packaged as a Tape & Reel (TR).Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -50°C~150°C TJ for reliable operation.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It is a member of the MLD1N06C family.It contains 2 terminations.The operation is carried out using the 3 pins.This LED driver is equipped with a total of 3 pins.It is included in the SMARTDISCRETES? series.In addition, LOGIC LEVEL COMPATIBLE can be produced using this LED driving board.A total of 1 elements are present in this list.SWITCHING transistors are used in the lighting driver.
MLD1N06CLT4 Features
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
MLD1N06CLT4 Applications
There are a lot of ON Semiconductor MLD1N06CLT4 Power Switches ICs applications.
- Portable Devices
- Hot-Swap Systems
- Portable GPS Device
- USB3.1 Power Delivery
- Various applications equipped with buttons
- Telecom and Network Systems
- Set-top-box
- USB Protection
- USB Power Distribution
- Portable/Handheld Devices
