MLD2N06CLT4G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -50°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | SMARTDISCRETES™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 400MOhm |
| Terminal Finish | Tin (Sn) |
| Additional Feature | LOGIC LEVEL COMPATIBLE, OVERVOLTAGE CLAMPED PROTECTION |
| Voltage - Rated DC | 62V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MLD2N06 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 40W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
| Rise Time | 3ns |
| Drain to Source Voltage (Vdss) | 62V |
| Fall Time (Typ) | 3 ns |
| Turn-Off Delay Time | 5 ns |
| Continuous Drain Current (ID) | 2A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 10V |
| Voltage - Load | 58V Max |
| Drain Current-Max (Abs) (ID) | 2A |
| Drain to Source Breakdown Voltage | 58V |
| Avalanche Energy Rating (Eas) | 80 mJ |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 300m Ω |
| Drain to Source Resistance | 400mOhm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MLD2N06CLT4G Overview
Tape & Reel (TR) is how it's packaged.The TO-252-3, DPak (2 Leads + Tab), SC-63 package includes it.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -50°C~150°C TJ.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.It is part of the MLD2N06 family of LED drivers.It contains 2 terminations.During operation, the 3 pins are used.The lighting driver is mounted in the direction of Surface Mount.The LED driver has a total of 3 pins.Currently, the LED driving board has 400MOhm resistance.This electrical component is part of the SMARTDISCRETES? series.The LED driver can also be used to produce LOGIC LEVEL COMPATIBLE, OVERVOLTAGE CLAMPED PROTECTION.There are 1 elements in total.SWITCHING transistors are applied to the lighting driver.
MLD2N06CLT4G Features
Resistance of 400MOhm
Additional features like LOGIC LEVEL COMPATIBLE, OVERVOLTAGE CLAMPED PROTECTION
Transistor applications such as SWITCHING
MLD2N06CLT4G Applications
There are a lot of ON Semiconductor MLD2N06CLT4G Power Switches ICs applications.
- Portable GPS Device
- Solid State Drivers
- USB Power Distribution
- Hot Swaps
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- PC Card Hot Swap
- Various applications equipped with buttons
- Portable GPS
- Telecom and Network Systems
