MLX91205KDC-AAL-003-RE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Triaxis® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | DC~100kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
| Pin Count | 8 |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 11mA |
| Polarization | Bidirectional |
| Nominal Supply Current | 11mA |
| Output Current | 1mA |
| Max Supply Current | 16mA |
| Accuracy | ±0.2% |
| Response Time | 8μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.05% |
| Sensitivity | 280mV/mT |
| For Measuring | AC/DC |
| Current - Sensing | 10mT |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MLX91205KDC-AAL-003-RE Overview
Current sensors are housed in 8-SOIC (0.154, 3.90mm Width) packages to ensure their safety. In order to protect these current sensors, the Tape & Reel (TR) is used to protect them. In order for current sensors to be effective, their current supply should not exceed 16mA. There is a 8 termination on the current sensors. As far as the current sensor is concerned, it has 8 pins. When operating, the sensors could supply 5.5V. While working, these current sensors can supply a voltage of 5V. Current sensors should have a 4.5V minimum voltage. Pins 8 are present on this electronic component. It is expected that a current sensor should supply a current of 11mA nominally. Current sensors should output a value of 1mA. In order for these electronic components to perform correctly, the current supplied by them should be 11mA.
MLX91205KDC-AAL-003-RE Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~100kHz
Sensing Current: 10mT
8-SOIC (0.154, 3.90mm Width) Package
MLX91205KDC-AAL-003-RE Applications
There are a lot of Melexis Technologies NV MLX91205KDC-AAL-003-RE Current Sensors applications.
- Uninterruptible Power Supplies(UPS)
- DC and AC power monitoring
- Switched Mode Power Supplies(SMPS)
- Motor and load control
- Monitor Motor Operation
- Mobile applications
- Electrical drives
- Closed-L oop DC- and AC-Current Sensor Modules
- Uninterruptable Power Supllies (UPS)
- Frequency, Voltage, and Solar Inverters
