MLX91205KDC-AAL-003-SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C |
| Packaging | Bulk |
| Published | 2013 |
| Series | Triaxis® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 5V |
| Frequency | DC~100kHz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 16mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 16mA |
| Accuracy | ±0.2% |
| Response Time | 8μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.05% |
| Sensitivity | 280mV/mT |
| For Measuring | AC/DC |
| Current - Sensing | 10mT |
| RoHS Status | RoHS Compliant |
MLX91205KDC-AAL-003-SP Overview
The current sensors are put into 8-SOIC (0.154, 3.90mm Width) packages for safety protection. A Bulk is used to protect the current sensors against damage. In these current sensors, the maximum output current should be 16mA. There should not be an increase in current supplied by current sensors above 16mA. In order for these current sensors to function properly, the operating temperature must not be below -40°C. But the maximum operating temperature for current sensors should be set to 125°C.
MLX91205KDC-AAL-003-SP Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~100kHz
Sensing Current: 10mT
8-SOIC (0.154, 3.90mm Width) Package
MLX91205KDC-AAL-003-SP Applications
There are a lot of Melexis Technologies NV MLX91205KDC-AAL-003-SP Current Sensors applications.
- Battery chargers and systems
- Static converters for DC motor drives
- Uninterruptable Power Supllies (UPS)
- Motor and load control
- Monitor Motor Operation
- Battery supplied applications
- Inverter and H-bridge current measurements
- Industrial Monitoring and Control Systems
- Power supplies for welding applications
- AC variable speed drives
