MLX91206LDC-CAH-002-TU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Published | 2010 |
| Series | Triaxis® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Voltage - Supply | 4.5V~5.5V |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Frequency | DC~90kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage or PWM (Selectable) |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Nominal Supply Current | 12mA |
| Output Current | 2mA |
| Max Supply Current | 12mA |
| Accuracy | ±1% |
| Response Time | 8μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.5% |
| Sensitivity | 170mV/mT |
| For Measuring | AC/DC |
| Current - Sensing | 25mT |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MLX91206LDC-CAH-002-TU Overview
For safety reasons, the current sensors are packaged in 8-SOIC (0.154, 3.90mm Width) packages. In order to protect these current sensors from damage, they are packaged in the Tube. There should not be an increase in current supplied by current sensors above 12mA. As long as the current sensors are operating, they could supply a voltage of 5.5V. The nominal current supplied by current sensors is 12mA. There should be 2mA current output from current sensors.
MLX91206LDC-CAH-002-TU Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~5.5V
Frequency: DC~90kHz
Sensing Current: 25mT
8-SOIC (0.154, 3.90mm Width) Package
MLX91206LDC-CAH-002-TU Applications
There are a lot of Melexis Technologies NV MLX91206LDC-CAH-002-TU Current Sensors applications.
- Industrial Monitoring and Control Systems
- Power supplies for welding applications
- Switched Mode Power Supplies(SMPS)
- DC and AC power monitoring
- Continuity
- Battery supplied applications
- Battery supplied applications
- Uninterruptable Power Supllies (UPS)
- OEM Current Sensing
- Inverter and H-bridge current measurements
