MLX91206LDC-CAH-004-TU
| Parameters | |
|---|---|
| Nominal Supply Current | 7mA |
| Output Current | 2mA |
| Max Supply Current | 12mA |
| Accuracy | ±1% |
| Response Time | 8μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.5% |
| Sensitivity | 77.5mV/mT |
| For Measuring | AC/DC |
| Current - Sensing | 25mT |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Published | 2011 |
| Series | Triaxis® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Hall Effect Sensor |
| Voltage - Supply | 4.5V~5.5V |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Frequency | DC~90kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage or PWM (Selectable) |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Polarization | Bidirectional |
MLX91206LDC-CAH-004-TU Overview
Current sensors are packaged in 8-SOIC (0.154, 3.90mm Width) packages to ensure their safety. The devices are protected from damage by the Tube package. It is recommended that current sensors do not supply a current greater than 12mA. When the current sensors are in operation, they may produce a voltage of 5.5V. As a general rule, current sensors should supply an electrical current of 7mA. Current sensors should output a value of 2mA.
MLX91206LDC-CAH-004-TU Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~5.5V
Frequency: DC~90kHz
Sensing Current: 25mT
8-SOIC (0.154, 3.90mm Width) Package
MLX91206LDC-CAH-004-TU Applications
There are a lot of Melexis Technologies NV MLX91206LDC-CAH-004-TU Current Sensors applications.
- DC and AC power monitoring
- Power supplies for welding applications
- Uninterruptable Power Supllies (UPS)
- Motor and load control
- Monitor Motor Operation
- Battery supplied applications
- Switched Mode Power Supplies(SMPS)
- Industrial Monitoring and Control Systems
- Battery chargers and systems
- Proving Switch
