MLX91206LDC-CAH-104-SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C |
| Packaging | Bulk |
| Published | 2011 |
| Series | Triaxis® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 5V |
| Frequency | DC~90kHz |
| Output | Ratiometric, Voltage or PWM (Selectable) |
| Current - Supply (Max) | 12mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 12mA |
| Accuracy | ±1% |
| Response Time | 8μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.5% |
| Sensitivity | 77.5mV/mT |
| For Measuring | AC/DC |
| Current - Sensing | 25mT |
| RoHS Status | RoHS Compliant |
MLX91206LDC-CAH-104-SP Overview
For safety reasons, the current sensors are enclosed in 8-SOIC (0.154, 3.90mm Width) packages. The current sensors are packaged in the Bulk in order to prevent damage to the devices. Current sensors should be capable of providing a maximum current of 12mA. Current sensors should not supply current higher than 12mA. In order for the current sensors to operate, the operating temperature must not be lower than -40°C. It is recommended, however, to set the maximum operating temperature for the current sensors to 150°C.
MLX91206LDC-CAH-104-SP Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~90kHz
Sensing Current: 25mT
8-SOIC (0.154, 3.90mm Width) Package
MLX91206LDC-CAH-104-SP Applications
There are a lot of Melexis Technologies NV MLX91206LDC-CAH-104-SP Current Sensors applications.
- Proving Switch
- Monitor Motor Operation
- Overcurrent Detection
- Battery supplied applications
- Leakage Current Sensors
- OEM Current Sensing
- Power factor correction
- Uninterruptible Power Supplies(UPS)
- Switched Mode Power Supplies(SMPS)
- Closed-L oop DC- and AC-Current Sensor Modules
