MLX91207LDC-CAA-007-SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C |
| Packaging | Bulk |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 5V |
| Frequency | DC~60kHz |
| Output | Ratiometric, Voltage (Selectable) |
| Current - Supply (Max) | 12mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 12mA |
| Accuracy | ±0.1% |
| Response Time | 8μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.1% |
| Sensitivity | 10mV/mT |
| For Measuring | AC/DC |
| Current - Sensing | 45mT |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MLX91207LDC-CAA-007-SP Overview
Safety reasons require that the current sensors be placed in 8-SOIC (0.154, 3.90mm Width) packages. As a safety measure, the current sensors are packaged inside the Bulk to prevent damage to the devices. It is recommended that these current sensors supply a maximum current of 12mA. A current sensor should not provide a current greater than 12mA. This current sensor must function at temperatures greater than -40°C at all times. It is recommended, however, to set the maximum operating temperature for the current sensors to 150°C.
MLX91207LDC-CAA-007-SP Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 5V
Frequency: DC~60kHz
Sensing Current: 45mT
8-SOIC (0.154, 3.90mm Width) Package
MLX91207LDC-CAA-007-SP Applications
There are a lot of Melexis Technologies NV MLX91207LDC-CAA-007-SP Current Sensors applications.
- OEM Current Sensing
- Battery chargers and systems
- Switched Mode Power Supplies (SMPS)
- Overcurrent Detection
- DC and AC power monitoring
- Inverter and H-bridge current measurements
- Electrical drives
- Continuity
- Power supply management
- Mobile applications
