MLX91208LDC-CAH-000-SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C |
| Packaging | Bulk |
| Published | 2015 |
| Series | Triaxis® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | DC~200kHz |
| Output | Ratiometric, Voltage (Selectable) |
| Current - Supply (Max) | 14mA |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 14mA |
| Accuracy | ±0.1% |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.75% |
| Sensitivity | 100mV/mT |
| For Measuring | AC/DC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MLX91208LDC-CAH-000-SP Overview
To ensure the safety of the current sensors, they are packaged in 8-SOIC (0.154, 3.90mm Width) packages. To protect the current sensors against damage, they have been packaged in the Bulk. It is recommended that these current sensors supply a maximum current of 14mA. The current supplied by current sensors should not be higher than 14mA. In order for the current sensors to operate, the operating temperature must not be lower than -40°C. Nonetheless, the maximum operating temperature for the current sensors should be set to 125°C.
MLX91208LDC-CAH-000-SP Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~5.5V
Frequency: DC~200kHz
8-SOIC (0.154, 3.90mm Width) Package
MLX91208LDC-CAH-000-SP Applications
There are a lot of Melexis Technologies NV MLX91208LDC-CAH-000-SP Current Sensors applications.
- Static converters for for DC motor drives
- Continuity
- Power supply management
- Switched Mode Power Supplies(SMPS)
- Overcurrent Detection
- General purpose inverters
- Electrical drives
- Leakage Current Sensors
- AC variabel speed drives and servo motor drives
- Power Supplies for welding applications
