MM5452V
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | COPS™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | DATA ENABLE INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 350mW |
| Technology | CMOS |
| Voltage - Supply | 3V~10V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MM5452 |
| Pin Count | 44 |
| Output Voltage | 50mV |
| Power Supplies | 3/10V |
| Configuration | 7 Segment + DP, Alphanumeric and Bar Graph |
| Interface | Serial |
| Nominal Supply Current | 40μA |
| Power Dissipation | 350mW |
| Output Current | 500mA |
| Max Supply Current | 40μA |
| Display Type | LCD |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Digits or Characters | 4.5 Digits |
| Number of Backplanes | 1-BP |
| Height Seated (Max) | 4.57mm |
| Length | 16.51mm |
| Width | 16.51mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MM5452V Overview
As with Tube, the package is designed similarly.A version 44-LCC (J-Lead) of the package includes it.Display type LCD for this electrical device.This electronic component is mounted on the board using the Surface Mount axis.During normal use, this electrical part has an operating temperature of -40°C~85°C.Using a 3V~10VV power source should be sufficient.Ending transmission lines with 44 terminations offers devices with the same characteristic impedance as the transmission lines themselves.The device belongs to the MM5452 family.There are a total of 21 44 pins on the device.The 44-pin design is what makes it so unique.As you can see from the image, this electronic component is mounted on the board using the Surface Mount axis.Display drivers is powered from a supply voltage of 5V.32 segments refer to any member of the Seller Group's equipment solutions business that falls under the category of "Electronics.".The same applies to Other Interface ICs.In addition, it can be operated from anywhere in the world by two 3/10V power supplies.Display drivers reaches 40μA when Display drivers is supplied wDisplay driversh the maximum current.A 1-BP backplane is an electronic circuits board that is used as a backplane.50mV is provided with the output voltage by it.Additionally, it is characteriDATA ENABLE INPUTed by DATA ENABLE INPUT.Drivers is a type of FPGA belonging to the COPS? series.
MM5452V Features
44-LCC (J-Lead) package
MM5452 family
44 pin count
44 pins
3/10V power supplies
MM5452V Applications
There are a lot of Texas Instruments MM5452V display drivers applications.
- Instrument Clusters
- Industrial Controllers and Instrumentation
- Battery Operated Applications
- Driving low-voltag fluorescent displays
- Battery Operated Products
- DC Plasma Displays
- Numerlc and Non-Numerlc Panel Dlsplays
- Test Equipment
- Gaming Machines Security
- Relay Driver
