banner_page

MM74C373N

D-Type, Flip-Flop, Latch 3V~15V 8 Bits Tri-State Latches 74C Series 74C373 20-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MM74C373N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 690
  • Description: D-Type, Flip-Flop, Latch 3V~15V 8 Bits Tri-State Latches 74C Series 74C373 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Supplier Device Package 20-PDIP
Operating Temperature -55°C~125°C
Packaging Tube
Series 74C
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Through Hole
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Voltage - Supply 3V~15V
Frequency 10MHz
Base Part Number 74C373
Output Type Tri-State
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 15V
Min Supply Voltage 3V
Nominal Supply Current 300μA
Output Current 48mA
Number of Bits 8
Propagation Delay 170 ns
Quiescent Current 50nA
Turn On Delay Time 70 ns
Logic Function D-Type, Flip-Flop, Latch
Number of Inputs 1
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Number of Gates 8
High Level Output Current -48mA
Low Level Output Current 24mA
Number of Input Lines 3
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 70ns
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

MM74C373N Overview


A package called 20-DIP (0.300, 7.62mm) contains it. This package has the format of Tube. There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. This electronic part is mounted in the way of Through Hole. A 3V~15V supply voltage is required to operate it. A temperature of -55°C~125°C is used for operation. An FPGA in this series belongs to the 74C family. 8 Bits are used in the design of this electronic part. There is no doubt that it belongs to the family 74C373. The pin configuration of the device is 20. Through Hole is the method used for mounting this electronic part. It contains 3 input lines where electronic circuits are present. With an output current of 48mA, it is highly flexible in terms of design. 3 output lines generate the binary equivalent of the input lines. As far as external factors are concerned, it consumes 50nA of quiescent current without getting affected by them. The element count is 1. It achieves superior flexibility by using 8 circuits. 24mA represents the low level output current. There is -48mA high level output current set. Ideally, the operating temperature should be lower than 125°C. A temperature greater than -55°C should be used for operation. It supports a maximum supply voltage of 15V. It operates with the minimal supply voltage of 3V.

MM74C373N Features


20-DIP (0.300, 7.62mm) package
74C series
8 Bits
74C373 family
20 pins
1 elements

MM74C373N Applications


There are a lot of ON Semiconductor MM74C373N Latches applications.

  • Clocks
  • Hammer
  • Network Switches
  • Shift left register
  • Digital bus buffer
  • Four-bit storage with output enable
  • Serial Output Register
  • Phase comparator
  • Display
  • General-Purpose Register

Write a review

Note: HTML is not translated!
    Bad           Good