MM74C73N
| Parameters | |
|---|---|
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74C |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 3V~15V |
| Frequency | 11MHz |
| Base Part Number | 74C73 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Number of Bits | 2 |
| Clock Frequency | 11MHz |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 70 ns |
| Logic Function | AND |
| Current - Quiescent (Iq) | 60μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 110ns @ 10V, 50pF |
| Trigger Type | Negative Edge |
| High Level Output Current | -8mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 8mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
MM74C73N Overview
In the form of 14-DIP (0.300, 7.62mm), it has been packaged. As part of the package Tube, it is embedded. It is configured with Differentialas an output. JK flip flop uses Negative Edgeas the trigger. Through Holeis positioned in the way of this electronic part. Powered by a 3V~15Vvolt supply, it operates as follows. -55°C~125°C TAis the operating temperature. This D latch has the type JK Type. It is a type of FPGA belonging to the 74C series. A frequency of 11MHzshould be the maximum output frequency. A total of 2 elements are present. There is 60μA quiescent consumption. It is a member of the 74C73 family. Input capacitance of this device is 5pF farads. There is an electronic part that is mounted in the way of Through Hole. 14pins are included in its design. There is a clock edge trigger type of Negative Edgeon this device. Flip flops designed with 2bits are used in this part. The superior flexibility is achieved through the use of 2 circuits. In order for the chip to function, it has 1output lines. 2input lines are available for you to choose from. -8mAis set as the high level output current. In the low level output current setting, 8mAis used. Temperatures below 125°Care ideal for operating. The operating temperature should be higher than -55°C. Initially, it requires a voltage of 3V as the minimum supply voltage. 15Vis the maximum supply voltage supported by it. It is possible to achieve a frequency of 11MHz.
MM74C73N Features
Tube package
74C series
14 pins
2 Bits
MM74C73N Applications
There are a lot of ON Semiconductor MM74C73N Flip Flops applications.
- Data transfer
- Divide a clock signal by 2 or 4
- 2 – Bit synchronous counter
- Cold spare funcion
- Balanced 24 mA output drivers
- Consumer
- QML qualified product
- EMI reduction circuitry
- Shift registers
- Dynamic threshold performance
