MM74C74M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | 74C |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 3V~15V |
| Frequency | 8MHz |
| Base Part Number | 74C74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Output Current | 8mA |
| Number of Bits | 2 |
| Clock Frequency | 8MHz |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 70 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 60μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 110ns @ 10V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | 8mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 8mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74C74M Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tube package. In the configuration, Differentialis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. It operates with a supply voltage of 3V~15V. It is operating at -55°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74Cseries of FPGAs. Its output frequency should not exceed 8MHz. In total, it contains 2 elements. There is a consumption of 60μAof quiescent energy. This D latch belongs to the family of 74C74. This T flip flop has a capacitance of 5pF farads at the input. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. A Positive Edgeclock edge trigger is used in this device. There are 2bits in this flip flop. The superior flexibility of this product is achieved by using 2 circuits. Featuring the maximum design flexibility, it has an output current of 8mA . It operates with 1 output lines. This input has 1lines. In this case, the high level output current is set to 8mA. A 8mAvalue is set for low-level output current. A temperature below 125°Cshould be used for operation. The operating temperature should be higher than -55°C. It is powered by 3V as its minimum supply voltage. It supports the maximal supply voltage of 15V. It is possible to achieve a frequency of 8MHz.
MM74C74M Features
Tube package
74C series
14 pins
2 Bits
MM74C74M Applications
There are a lot of ON Semiconductor MM74C74M Flip Flops applications.
- Single Up Count-Control Line
- Latch-up performance
- Data Synchronizers
- Asynchronous counter
- Balanced Propagation Delays
- Synchronous counter
- QML qualified product
- Test & Measurement
- Bounce elimination switch
- Automotive
