Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
143mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
1999 |
Series |
74HC |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Tin (Sn) |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC138 |
Number of Outputs |
8 |
Number of Elements |
1 |
Circuit |
1 x 3:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Power Dissipation |
600mW |
Propagation Delay |
252 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
252 ns |
Family |
HC/UH |
Logic Function |
Decoder |
Number of Inputs |
3 |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Max I(ol) |
0.004 A |
Prop. Delay@Nom-Sup |
50 ns |
Voltage Supply Source |
Single Supply |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MM74HC138M Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.Mounting is performed using Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74HC series, the multiplexers can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number of 74HC138 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.As the end of conductors, it uses GULL WING.There is a type of supply of Single.It is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of HC/UH.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.It is provided that 2/6V has a power supply in order to function normally.The turn signal switch has 8 outputs.It consumes 8μA current of multiplexer ic without external influences.This multiplexer provides 3 inputs.In the mux switch configuration, there are 1 elements.
MM74HC138M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
MM74HC138M Applications
There are a lot of ON Semiconductor MM74HC138M Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Automation system
- Microprocessor memory systems
- Seven segment displays
- Home automation system
- Logic circuits
- Code conversion
- Speed synchronization of multiple motors in industries
- RF-based home automation system
- D/A converters