banner_page

MM74HC151N

2V~6V 16 Pin 74HC151 Signal switch74HC Series 1 OutputsMin 2V VMax 6V V


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MM74HC151N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 472
  • Description: 2V~6V 16 Pin 74HC151 Signal switch74HC Series 1 OutputsMin 2V VMax 6V V(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Supplier Device Package 16-PDIP
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Through Hole
Type Multiplexer
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 2V~6V
Base Part Number 74HC151
Number of Outputs 1
Max Output Current 5.2mA
Circuit 1 x 8:1
Polarity Non-Inverting
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Power Dissipation 600mW
Propagation Delay 33 ns
Logic Function Multiplexer, Mux
Number of Inputs 8
Current - Output High, Low 5.2mA 5.2mA
Supply Type Single
Number of Gates 1
High Level Output Current 5.2mA
Low Level Output Current 5.2mA
Number of Input Lines 3
Voltage Supply Source Single Supply
Independent Circuits 1
Number of Output Lines 2
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

MM74HC151N Overview


Due to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.The package is in the form of Tube.digital switch ic uses the method of Through Hole for mounting.In the multiplexers, the analog IC is indicated by Multiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.Multiplexers in the 74HC series are suitable for a wide range of applications.The base part number is 74HC151, so you can find its logic switch related parts using that number.Single is used as its supply type.Currently, it is configured with 16 pins.It is mounted in the way of Through Hole.The turn signal switch has 1 outputs.This multiplexer has a total of 8 inputs.In order to accept voltage levels, the multiplexers have input lines 3 on the board.The signal source consists of 2 output lines.This turn signal switch's circuit uses 1 transmission channels.Signal switch operation at 85°C temperature is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 6V.According to its specifications, the digital swith requires a minimum supply voltage of 2V.To ensure that the digitalswitch performs properly, 1 circuits are formed.

MM74HC151N Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
3 input lines
2 output lines

MM74HC151N Applications


There are a lot of ON Semiconductor MM74HC151N Signal Switches / Multiplexers / Decoders applications.

  • Code conversion
  • Data demultiplexing
  • Arithmetic Logic Units
  • Home automation system
  • D/A converters
  • A robotic vehicle with the metal detector
  • Transmission from the computer system of a satellite
  • Logic gates for other digital devices
  • Enabling block of memory depending on address in memory chips
  • Audio transmission

Write a review

Note: HTML is not translated!
    Bad           Good