MM74HC174M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Output Current | 5.2mA |
| Clock Frequency | 31MHz |
| Propagation Delay | 165 ns |
| Turn On Delay Time | 16 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC174M Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. A frequency of 31MHzshould not be exceeded by its output. There are 1 elements in it. As a result, it consumes 8μA quiescent current. You can search similar parts based on 74HC174. Input capacitance of this device is 5pF farads. There is an electronic part mounted in the way of Surface Mount. The 16pins are designed into the board. This device's clock edge trigger type is Positive Edge. Despite its superior flexibility, it relies on 7 circuits to achieve it. With an output current of 5.2mA, it is possible to design the device in any way you want. Currently, there are 3 input lines present.
MM74HC174M Features
Tube package
74HC series
16 pins
MM74HC174M Applications
There are a lot of ON Semiconductor MM74HC174M Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Guaranteed simultaneous switching noise level
- Parallel data storage
- Common Clocks
- Set-reset capability
- ATE
- Data storage
- Event Detectors
- Latch-up performance
- Synchronous counter
