MM74HC174MTCX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 31MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 24 MHz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MM74HC174MTCX Overview
It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. This output is configured with Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74HCseries of FPGAs. Its output frequency should not exceed 31MHz. There are 1 elements in it. During its operation, it consumes 8μA quiescent energy. 16terminations have occurred. Power is supplied from a voltage of 5V volts. Its input capacitance is 5pF farads. A device of this type belongs to the family of HC/UH. Vsup reaches 6V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be above 2V.
MM74HC174MTCX Features
Tape & Reel (TR) package
74HC series
MM74HC174MTCX Applications
There are a lot of Rochester Electronics, LLC MM74HC174MTCX Flip Flops applications.
- Patented noise
- Modulo – n – counter
- Frequency division
- ESCC
- Instrumentation
- Divide a clock signal by 2 or 4
- ESD performance
- Supports Live Insertion
- Safety Clamp
- Common Clocks
