MM74HC175MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 70MHz |
| Propagation Delay | 190 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 70 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC175MTCX Overview
The item is packaged in 16-TSSOP (0.173, 4.40mm Width)cases. It is contained within the Tape & Reel (TR)package. Differentialis the output configured for it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 70MHzshould not be exceeded by its output. D latch consists of 1 elements. Terminations are 16. JK flip flop belongs to 74HC175 family. A JK flip flop with a 5pFfarad input capacitance is used here. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 16pins on it. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 4bits has been designed. Vsup reaches its maximum value at 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility is achieved through the use of 4 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It operates from 2/6V power supplies. This D latch consumes 8μA quiescent current at all.
MM74HC175MTCX Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
2/6V power supplies
MM74HC175MTCX Applications
There are a lot of ON Semiconductor MM74HC175MTCX Flip Flops applications.
- Patented noise
- Safety Clamp
- Memory
- Frequency division
- Shift Registers
- Computing
- Pattern generators
- Registers
- QML qualified product
- Buffer registers
