MM74HC175N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 70MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 28 MHz |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MM74HC175N Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). It is included in the package Tube. As configured, the output uses Differential. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74HC series. This D flip flop should not have a frequency greater than 70MHz. In total, there are 1 elements. There is 8μA quiescent consumption. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Power is provided by a 5V supply. A JK flip flop with a 5pFfarad input capacitance is used here. It belongs to the family of electronic devices known as HC/UH. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V.
MM74HC175N Features
Tube package
74HC series
MM74HC175N Applications
There are a lot of Rochester Electronics, LLC MM74HC175N Flip Flops applications.
- Control circuits
- Supports Live Insertion
- Modulo – n – counter
- Computers
- ATE
- Balanced 24 mA output drivers
- Shift registers
- ESD protection
- Storage Registers
- Reduced system switching noise
