MM74HC251N
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Gates | 1 |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 16 |
| Number of Outputs | 2 |
MM74HC251N Overview
In order to save board space, digital switch is located in the 16-DIP (0.300, 7.62mm).The package is in the form of Tube.Digital switch ic adheres to a mounting method of Through Hole.A digital IC Multiplexer is used as the analog component of the multiplexers.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.Among its basic features are 16 terminations.There are 16 component pins in this turn signal switch.The board is configured with 16 pins.The HC/UH family includes the logic switch.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.The turn signal switch contains 2 outputs designed to operate.
MM74HC251N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
MM74HC251N Applications
There are a lot of Rochester Electronics, LLC MM74HC251N Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Signal router
- Code converters
- Automatic health monitoring systems
- A robotic vehicle with the metal detector
- Analog, digital or video signal switching
- To select different devices in microprocessor input
- Microprocessor input/output systems
- VGA
- To select different devices in microprocessor output
