MM74HC259M
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC259 |
| Output Type | Standard |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 17 ns |
| Logic Function | D-Type, Latch |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Number of Gates | 1 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Delay Time - Propagation | 17ns |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
MM74HC259M Overview
The 16-SOIC (0.154, 3.90mm Width) package contains it. Tube is the way it is packaged. In this configuration, the output is set to Standard. A D-Type, Addressable logic type is used in this electrical device. Mounting this electronic component follows the Surface Mount method. A 2V~6V voltage supply is required for operation. It operates at -40°C~85°C degrees Celsius. This FPGA is part of the 74HC series. The design of this electronic part contains 8 bits. 74HC259 is its family. Designed with 16 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. It consists of 3 input lines from which an electronic circuit can be built. Its output current of 5.2mA ensures maximum design flexibility. The binary equivalent of the input line is generated by 8 output lines. The element count is 1. 1 circuits enable it to achieve high performance. 5.2mA represents the low level output current. In the high level output current, the value is set to -5.2mA. Ideally, the temperature should not be higher than 85°C. It is recommended to operate at a temperature higher than -40°C. It is capable of providing a maximum supply voltage of 6V. In order for the machine to operate, the supply voltage must be 2V.
MM74HC259M Features
16-SOIC (0.154, 3.90mm Width) package
74HC series
8 Bits
74HC259 family
16 pins
1 elements
MM74HC259M Applications
There are a lot of ON Semiconductor MM74HC259M Latches applications.
- Relay
- Multistage ripple counting
- Up/down difference counting
- Parallel-to-Serial Data Conversion
- Double bus register system
- Automotive Cluster
- Meter applications
- Hammer Device Information
- Motor Drives
- Parallel data storage
