MM74HC373MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 2.5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 280 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 19 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height | 900μm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC373MTC Overview
20-TSSOP (0.173, 4.40mm Width) contains it. As a result, it has a packaging of Tube. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Mounting this electronic component follows the Surface Mount method. A 2V~6V voltage supply is required for operation. There is -40°C~85°C operating temperature. 74HC is the series number of this FPGA. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74HC373. The device works with a voltage of 4.5V for its supply voltage. HC/UH is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. This device has a total of 2 ports. This part is included in FF/Latches. Vsup reaches 6V as the maximum supply voltage. It operates from 2/6V power supplies. It is recommended that the supply voltage (Vsup) be greater than 2V. Electronic circuits comprise 3 input lines. Its 7.8mA output current allows for maximum design flexibility. High efficiency requires maintaining the supply voltage at 2.5V. There are no external factors that affect it, so it consumes 8μA quiescent current.
MM74HC373MTC Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pins
2/6V power supplies
MM74HC373MTC Applications
There are a lot of ON Semiconductor MM74HC373MTC Latches applications.
- Meter applications
- Parallel data storage
- Lamp and Display (LED)
- Accumulator Registers
- Serial Input
- Instrumentation
- Counting
- Clocks
- Serial Output Register
- Hammer Device Information
