banner_page

MM74HC373WM

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC373 DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MM74HC373WM
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 299
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC373 DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 801mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2005
Series 74HC
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 4.5V
Base Part Number 74HC373
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 7.8mA
Number of Bits 8
Propagation Delay 280 ns
Quiescent Current 8μA
Turn On Delay Time 19 ns
Family HC/UH
Logic Function D-Type, Latch
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Number of Gates 8
Independent Circuits 1
Number of Output Lines 3
Height 2.35mm
Length 13mm
Width 7.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MM74HC373WM Overview


In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. A Tube package is used to package it. Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74HC series. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74HC373 family. In order to function, the supply voltage should be set to 4.5V. HC/UH is the family name of this electronic device. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. 2/6V power supplies are needed to operate it. A supply voltage (Vsup) greater than 2V is required. With 7.8mA, maximum design flexibility is ensured. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors.

MM74HC373WM Features


20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC373 family
20 pins
2/6V power supplies

MM74HC373WM Applications


There are a lot of ON Semiconductor MM74HC373WM Latches applications.

  • Buffer/Storage Registers
  • Shift Registers
  • Automotive Body Electronics
  • Automotive Cluster
  • Audio and video switching
  • Shift left register
  • Display
  • BCD counting
  • Buffer Storage
  • Parallel data synchronization

Write a review

Note: HTML is not translated!
    Bad           Good