MM74HC373WMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC373 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 280 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 19 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height | 2.642mm |
| Length | 13.01mm |
| Width | 7.595mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC373WMX Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). This package has the format of Tape & Reel (TR). It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 2V~6V. The operating temperature is -40°C~85°C. There are a number of FPGAs in this series, including this one. With this electronic part, there are 8 bits. A device with this design has 20 terminations. 74HC373 is the family name of it. The device is operated when the supply voltage is set to 4.5V. It is a member of the HC/UH family of electronic devices. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. 6V is the maximum supply voltage (Vsup). 2/6V power supplies are needed to operate it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. It consists of 3 input lines from which an electronic circuit can be built. This device is well suited for TR based on its reliable performance. There are no external factors that affect it, so it consumes 8μA quiescent current.
MM74HC373WMX Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC373 family
20 pins
2/6V power supplies
MM74HC373WMX Applications
There are a lot of ON Semiconductor MM74HC373WMX Latches applications.
- Hammer Device Information
- Parallel-to-Serial Data Conversion
- Data acquisition
- Serial Output Data Queuing
- Buffer register
- Automatic test equipment
- Lamp and Display (LED)
- Frequency dividing
- Parallel data synchronization
- Decade counting
