MM74HC374MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 191mg |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 230 ns |
| Turn On Delay Time | 20 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC374MTC Overview
It is embeded in TSSOP case. There is an embedded version in the package Tube. A total of 1 elements are present. There have been 20 terminations. A voltage of 4.5V provides power to the D latch. In this case, the D flip flop belongs to the HC/UHfamily. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with 8bits. There are 2 ports embedded in the flip flops. Currently, there are 3 input lines present. -7.8mA is set as the high level output current. It is set to 7.8mAfor the low level output current. There should be a temperature below 85°Cduring operation. Ideally, the operating temperature should be higher than -40°C. The system operates with a minimum supply voltage of 2V. The maximum supply voltage supported by the flip flop is 6V. It is possible to achieve a frequency of 35MHz. The logic IC it adopts is BUS DRIVER. As a result, it is equipped with 1 functions . It is of 2 channels.
MM74HC374MTC Features
Tube package
20 pins
8 Bits
1 Functions
MM74HC374MTC Applications
There are a lot of ON Semiconductor MM74HC374MTC Flip Flops applications.
- Patented noise
- Differential Individual
- Memory
- Synchronous counter
- 2 – Bit synchronous counter
- ATE
- Automotive
- Load Control
- ESD performance
- EMI reduction circuitry
