MM74HC393MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 50MHz |
| Base Part Number | 74HC393 |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 4 |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 430 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 50MHz |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC393MTC Overview
This device is supplied in the 14-TSSOP (0.173, 4.40mm Width) package. A wire connects the 2elements. Tubeis used to package it. As part of the circuit, there are 14pins used to connect other components. The way of Surface Mount is used to mount it. This device is a member of the 74HCseries and is well suited for a wide range of applications. Binary Counteris adopted as the logic type. Setting the operating temperature to -40°C~85°C is recommended. It adopts a mounting type of Surface Mount. Providing a supply voltage of 2V~6Vallows it to operate more reliably. The array has 4elements. As far as the device is concerned, there are 4bits of information. Among its base part number [0], you will find additional parts that are related. Electrical characteristics are acceptable at extended periods of time at temperatures above [0]. This device is designed to operate within a specified temperature range with a lower limit generally set at -40°C. Frequency 50MHzdetermines its operation. It reaches 6Vvoltage at its maximum. Devices are capable of operating at a minimum voltage of 2V. The 1input lines are used to input binary data as on/off signals. The device has a total of 4 output lines. During normal operation, it consists of 2circuits.
MM74HC393MTC Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Frequency of 50MHz
MM74HC393MTC Applications
There are a lot of ON Semiconductor MM74HC393MTC Counters & Dividers applications.
- Clocks
- Fixed and programmable counters greater than 10
- LINEARIZATION
- Up Counters
- Frequency division
- Timers
- ALGEBRAIC COMPUTATION
- counting/frequency sy nthesizers-BCD output
- Binary counter/decoder
- SQUARE ROOT
