MM74HC393N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 50MHz |
| Base Part Number | 74HC393 |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 4 |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 430 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Number of Inputs | 8 |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 50MHz |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC393N Overview
This is a device supplied in the 14-DIP (0.300, 7.62mm) package. The 2elements are connected by wires. As [0], it is packaged. A circuit is connected to other components by 14pins. Using [0], it can be mounted. As a member of the 74HCseries, it is ideal for a wide range of applications. It is assumed that the logic type is [0]. It is recommended that the operating temperature be set to -40°C~85°C. Using a Through Holemounting type, it is mounted. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. The array contains elements containing 4bits each. There is information in the device in the form of 4bits. Its base part number, [0], contains more related parts. The electrical properties of the device remain stable at a maximum temperature of [0]. An operating temperature range is specified with a lower limit generally set at -40°C degrees Celsius. The frequency of the system is 50MHz. There is a maximum voltage of 6Vavailable for the device. There is a minimum voltage available for the device of 2V. There are 1 input lines that allow binary data to be input in the form of an on/off signal. As far as output lines are concerned, it has [0]. To ensure normal operation, it is designed with 2circuits. 8 outputs is received by the system.
MM74HC393N Features
Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
Frequency of 50MHz
MM74HC393N Applications
There are a lot of ON Semiconductor MM74HC393N Counters & Dividers applications.
- Frequency dividing circuits
- Signal gating
- Fixed and programmable counters greater than 10
- Clocks
- Programmable binary and decade
- LINEARIZATION
- Binary counter/decoder
- Frequency division
- MULTIPLICATION
- SQUARING
