MM74HC393N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Reset | Asynchronous |
| Family | HC/UH |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Propagation Delay (tpd) | 360 ns |
| Count Rate | 50MHz |
| Height Seated (Max) | 5.08mm |
| Length | 19.18mm |
| RoHS Status | ROHS3 Compliant |
MM74HC393N Overview
A 14-DIP (0.300, 7.62mm)package is used for this device. It is configured with 14terminations. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. In wires, 2elements are connected. The total number of component pins is 14. In this case, it is packaged as Tube. It is included in the HC/UHfamily. This device is a member of the 74HCseries and is well suited for a wide range of applications. It is assumed that the logic type is [0]. It is recommended to set the operating temperature to -40°C~85°C. This device is mounted in the Through Holeposition. In the presence of the supply voltage of [0], it can operate more reliably. The array stores 4bits in each element. Based on the Pbfree code, the result may be yes. There is a minimum supply voltage (Vsup) of 2V volts. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
MM74HC393N Features
Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
MM74HC393N Applications
There are a lot of Rochester Electronics, LLC MM74HC393N Counters & Dividers applications.
- Time Out Timer for Consumer-Application Industrial Controls
- Analog multiplexing and demultiplexing
- SQUARING
- TRUE RMS-TO-DC CONVERSION
- DIVISION
- SQUARE ROOT
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Programmable decade counters
- ALGEBRAIC COMPUTATION
- Binary counter/decoder
