MM74HC4040MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 302 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 12 |
| Number of Input Lines | 1 |
| fmax-Min | 28 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4040MTC Overview
A device of this type is supplied in a package of type [0]. For its configuration, 16terminations are used. As a result of the supply voltage of 0, 4.5Vcan operate in a fully flexible manner. An interconnection of 1elements is provided by wires. In all, there are 16 pins on each component. Circuit components are connected by 16pins. The Surface Mountway is used to mount it. In this case, it emerges as a member of the HC/UH family. The array contains elements containing 12bits each. The device has a temperature grade of INDUSTRIAL. Electrical characteristics are acceptable at extended periods of time at temperatures above [0]. Generally, the temperature limit is set at -40°Cso it will operate over a specified range. 6Vis the maximum voltage that the device can handle. In the case of this device, the minimum voltage is as low as 2V volts. 1input lines are used to input binary data as on/off signals.
MM74HC4040MTC Features
Embedded in the TSSOP package
12 bits per element
MM74HC4040MTC Applications
There are a lot of Fairchild (ON Semiconductor) MM74HC4040MTC Counters & Dividers applications.
- Up Counters
- Clocks
- Analog multiplexing and demultiplexing
- ALGEBRAIC COMPUTATION
- Digital multiplexing and demultiplexing
- Fixed or Programmable Frequency Division
- Time delay circuits
- VHF, UHF, FM, AM, etc.
- Control counters
- Communications Digital Frequency Synthesizers;
