MM74HC4040MTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 302 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 12 |
| Number of Input Lines | 1 |
| fmax-Min | 28 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
MM74HC4040MTCX Overview
This device is supplied in the TSSOP package. This configuration uses 16terminations. Having a voltage supply of 4.5Vallows it to operate in a highly flexible manner. In wires, 1elements are connected. 16is the number of pins on all components. Circuit components are connected with 16pins. The device is mounted in the direction of [0]. In this case, it emerges as a member of the HC/UH family. The array has 12elements. There is a temperature grade of INDUSTRIALon this device. In order to package it, TAPE AND REELis employed. This device operates at 85°C°C for extended periods of time with acceptable electrical stability. It operates within a specified temperature range, with the lower limit typically set at -40°C degrees Celsius. 6Vis the maximum voltage that the device can handle. A minimum voltage of 2Vis available for the device. A total of 1input lines are used to input binary data in the form of on/off signals.
MM74HC4040MTCX Features
Embedded in the TSSOP package
12 bits per element
MM74HC4040MTCX Applications
There are a lot of Fairchild (ON Semiconductor) MM74HC4040MTCX Counters & Dividers applications.
- Time-delay circuits
- Frequency dividers
- TRUE RMS-TO-DC CONVERSION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Decade counter/decimal decode display (CD4017B）
- DIVISION
- Programmable binary and decade
- Dual Up Counters
- Fixed and programmable counters greater than 10
- Frequency division
