MM74HC4051M
| Parameters | |
|---|---|
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4051 |
| Number of Outputs | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 355 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 35MHz |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 90pF |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 15Ohm |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
MM74HC4051M Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature around -40°C~85°C TA extended. Due to its 1 channels, the electrical component produces high-quality output. There are 1 circuits in this multiplexer. 74HC4051 can be used to search for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. The functions of 16 pins can be found in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. The digital multiplexer has a low cost Dual supply. The lowest voltage the electronic part should receive is 2V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. If you are using a dual power supply, you should attach at least 1V. The 8 inputs need to be operated in order to work. 30MHz-bandwidths can be used to transfer data between multiplexers. A temperature above 85°C is not suitable for operation of the analogue multiplexer. In this digital multiplexer, there are 1 outputs. It is possible to purchase a 16-SOIC package from suppliers.
MM74HC4051M Features
1 Channels
-3db Bandwidth: 35MHz
Bandwidth: 30MHz
MM74HC4051M Applications
There are a lot of ON Semiconductor MM74HC4051M Analog Switches & Multiplexers ICs applications.
- MP3 players
- Fiber to the Home
- Intelligent PBX
- SDH/SONET multiplexers
- SONET
- Fault Tolerant Systems
- Cell phones
- Industrial control systems
- Battery Powered Systems
- Video switching
