MM74HC4051MTCX
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4051 |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 355 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 35MHz |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 90pF |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
MM74HC4051MTCX Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. The circuits in this analogue multiplexer number 1. If you are looking for variants of the digital switch, trying search with 74HC4051. As far as internal resistance is concerned, it has 100Ohm. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Analog switch ics with Dual supply type are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. You should attach at least 1V voltage if you are using dual power supply. There are 8 inputs to be operated. A 30MHz-bandwidth can be used for data transfer.
MM74HC4051MTCX Features
-3db Bandwidth: 35MHz
Bandwidth: 30MHz
MM74HC4051MTCX Applications
There are a lot of ON Semiconductor MM74HC4051MTCX Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Cable Modem
- Microprocessor controlled systems
- Industrial
- PCMCIA cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Relay Replacement
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- RGB switches
- Imaging
