MM74HC4051MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4051 |
| Number of Outputs | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 355 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 35MHz |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 90pF |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 15Ohm |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4051MX Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature around -40°C~85°C TA extended. High-quality output is provided by the electronic component's 1 channels. There are 1 circuits in this switch device. Try searching for 74HC4051 variants of the analog switch ic. As far as internal resistance is concerned, it has 100Ohm. For functions related to 16 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Analogue multiplexers of the Dual supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. For this switch, a dual supply voltage is feasible, but it must not exceed 6VWith dual power supplies, you should attach at least 1V. The electrical component supports 8 inputs. A 30MHz-bandwidth can be used for data transfer. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. An output of 1 is provided by the digital multiplexer. It is possible to purchase a 16-SOIC package from suppliers.
MM74HC4051MX Features
1 Channels
-3db Bandwidth: 35MHz
Bandwidth: 30MHz
MM74HC4051MX Applications
There are a lot of ON Semiconductor MM74HC4051MX Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Audio and video switching
- RGB switches
- USB 1.1 signal switching circuits
- High-Voltage
- Channel Banks
- PDAs
- T1/E1 Terminals
- Relay Replacement
- Precision test equipment
