MM74HC4053M

41ns, 32ns SPDT 100Ohm Analog Switches 74HC4053 100nA 16-SOIC (0.154, 3.90mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MM74HC4053M
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 677
Description: 41ns, 32ns SPDT 100Ohm Analog Switches 74HC4053 100nA 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Supplier Device Package	16-SOIC
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	230Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	500mW
Base Part Number	74HC4053
Number of Outputs	3
Polarity	Non-Inverting
Number of Channels	3
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Power Dissipation	500mW
Throw Configuration	SPDT
Propagation Delay	60 ns
Turn On Delay Time	355 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual
Bandwidth	30MHz
Turn-Off Delay Time	290 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	35MHz
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF 30pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	41ns, 32ns
Channel-to-Channel Matching (ΔRon)	15Ohm
Crosstalk	-50dB @ 1MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

MM74HC4053M Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. High-quality output is provided by the electronic component's 3 channels. These analog multiplexers are built based on SPDT switching circuits. Circuits number 3 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4053. A 230Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analogue multiplexers of the Dual supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using a dual power supply, you should attach at least 1V. Among the inputs that can be operated are the 6 inputs. There are 30MHz bandwidths for data transfer. Temperatures above 85°C should not be used to operate the switches. The analog switch ics has 3 outputs. There is a 16-SOIC package offered by suppliers.