MM74HC4053MTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4053 |
| Number of Outputs | 6 |
| Max Output Current | 25mA |
| Number of Channels | 3 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 16μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPDT |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 355 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 35MHz |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 30pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 15Ohm |
| Crosstalk | -50dB @ 1MHz |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4053MTCX Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. Due to its 3 channels, the electrical component produces high-quality output. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 3 circuits. If you are looking for variants of the digital switch, trying search with 74HC4053. Internally, this switch multiplexer has a resistance of 100Ohm. Please refer to the datasheets for 16 pins functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. The digital multiplexer has a low cost Dual supply. In order for the electronic part to function properly, the lowest voltage should be 2V. For this switch, a dual supply voltage is feasible, but it must not exceed 6VFor dual power supplies, a voltage of at least 1V should be attached. The electrical component supports 6 inputs. A 30MHz-bandwidth can be used for data transfer. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. This digital multiplexer has 6 outputs. Suppliers offer a 16-TSSOP package.
MM74HC4053MTCX Features
3 Channels
Switch Circuit: SPDT
-3db Bandwidth: 35MHz
Bandwidth: 30MHz
MM74HC4053MTCX Applications
There are a lot of ON Semiconductor MM74HC4053MTCX Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- Intelligent PBX
- PDH Multiplexers
- SDH
- Cellular phones
- Frame Relay Equipment
- Modems
- Fiber In The Loop (FITL)
- Optical Applications
- Industrial
