banner_page

MM74HC4053N

41ns, 32ns SPDT 100Ohm Analog Switches 74HC4053 100nA 16-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MM74HC4053N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 616
  • Description: 41ns, 32ns SPDT 100Ohm Analog Switches 74HC4053 100nA 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Supplier Device Package 16-PDIP
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1999
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 230Ohm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Max Power Dissipation 600mW
Base Part Number 74HC4053
Number of Outputs 3
Polarity Non-Inverting
Number of Channels 3
Number of Circuits 3
Max Supply Voltage 6V
Min Supply Voltage 2V
Power Dissipation 600mW
Throw Configuration SPDT
Propagation Delay 60 ns
Turn On Delay Time 355 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 6
Voltage - Supply, Single/Dual (±) 2V~6V ±2V~6V
Supply Type Dual
Bandwidth 30MHz
Turn-Off Delay Time 290 ns
Max Dual Supply Voltage 6V
-3db Bandwidth 35MHz
On-State Resistance (Max) 100Ohm
Min Dual Supply Voltage 1V
Multiplexer/Demultiplexer Circuit 2:1
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 5pF 30pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 41ns, 32ns
Channel-to-Channel Matching (ΔRon) 15Ohm
Crosstalk -50dB @ 1MHz
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

MM74HC4053N Overview


Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. A electrical component with 3 channels is capable of high-quality output. Unlike digital switches, these are based on SPDT switching circuits. A 3 circuit is present in this switch device. Use 74HC4053 to search for variants of the digital switches. Analog switches have 230Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analog switch ics with Dual supply type are cost-effective. A low voltage of 2V should be applied to the electronic component. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. When using dual power supplies, you should attach at least 1V. Among the inputs that can be operated are the 6 inputs. The transfer of data can be performed over 30MHz bandwidths. An environment with a temperature greater than 85°C should not be used to operate the digital switches. 3 outputs are included in the analogue multiplexer. Suppliers offer the 16-PDIP package.

MM74HC4053N Features


3 Channels
Switch Circuit: SPDT
-3db Bandwidth: 35MHz
Bandwidth: 30MHz

MM74HC4053N Applications


There are a lot of ON Semiconductor MM74HC4053N Analog Switches & Multiplexers ICs applications.

  • Voice over IP/DSL – Integrated Access Devices, Smart
  • PCMCIA cards
  • Channel Banks
  • Access Concentrators
  • Microprocessor Controlled Analog Systems
  • Industrial and process control systems
  • Transmit
  • Data Acquisition Systems
  • Cell phones
  • Low-Voltage

Write a review

Note: HTML is not translated!
    Bad           Good