MM74HC4053WMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4053 |
| Polarity | Non-Inverting |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 355 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±2V~6V |
| Supply Type | Dual |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 290 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 35MHz |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 30pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4053WMX Overview
Presented in 16-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Unlike digital switches, these are based on SPDT switching circuits. A total of 3 circuits make up this switch device. Try searching for the analog switch ic with 74HC4053 if you are looking for variants. In this multiplexer, the internal resistance is 100Ohm. The datasheets for the 16 pins explain the functions. A voltage higher than 6V should not normally be supplied to the switches. Digital switch that provides Dual power at a cost-effective price. The lowest voltage fed to the electronic component should be 2V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. If you are using dual power supplies, you should attach at least 1V. Operating the 6 inputs requires 6 inputs. The transfer of data can be performed over 30MHz bandwidths.
MM74HC4053WMX Features
Switch Circuit: SPDT
-3db Bandwidth: 35MHz
Bandwidth: 30MHz
MM74HC4053WMX Applications
There are a lot of ON Semiconductor MM74HC4053WMX Analog Switches & Multiplexers ICs applications.
- CSU
- Data switching
- E1 Multiplexer
- Avionics
- Automotive applications
- Switching Systems
- Intelligent PBX
- Power routing
- Routers
- Optical Applications
