MM74HC4060MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 14 |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 358 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Max I(ol) | 0.004 A |
| Number of Output Lines | 10 |
| fmax-Min | 35 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4060MTC Overview
This is a device supplied in the TSSOP package. In order to configure it, it uses 16terminations. This device is fully flexible due to the supply voltage of [0]. An interconnection of 1elements is provided by wires. The total number of component pins is 16. In the circuit, there are 16pins that connect other parts. It is mounted in the manner of [0]. In this case, it appears as a member of the HC/UH family. This device contains information in 14bits. It is manufactured in the temperature grade INDUSTRIAL. It operates at the maximum temperature of 85°C for extended periods of time with acceptable stability of its electrical characteristics. It operates within a specified temperature range, with the lower limit typically set at -40°C degrees Celsius. 6Vis the maximum voltage available to the device. It is possible to operate the device at as low a voltage as 2V. The device is equipped with a 10output line.
MM74HC4060MTC Features
Embedded in the TSSOP package
MM74HC4060MTC Applications
There are a lot of Fairchild (ON Semiconductor) MM74HC4060MTC Counters & Dividers applications.
- Frequency dividers
- VHF, UHF, FM, AM, etc.
- Clocks
- Signal gating
- ANALOG SIGNAL PROCESSING
- LINEARIZATION
- Fixed or Programmable Frequency Division
- Programmable binary and decade
- SQUARING
- Fixed and programmable counters greater than 10
