MM74HC4066MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 70Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4066 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Max Supply Current | 8μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 168 ns |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 10ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 5Ohm |
| Crosstalk | -50dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~12V |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4066MX Overview
Shipping overseas is convenient with the electronic component packed in 14-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. High-quality output is provided by the electronic component's 4 channels. A SPST - NO switching circuit is used for these analog switches. 4 circuits are used in this analogue multiplexer. Search with 74HC4066 if you are looking for analog multiplexer variants. It has an internal resistance of 70Ohm. For functions related to 14 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 2V~12V, draining from a single voltage supply. If put voltage greater than 8μA on the device, damage may be caused to the analogue multiplexer. Operating the 4 inputs requires 4 inputs. The switches should not operate in an environment where the temperature is higher than 85°C. A analog switch ics with 4 outputs is included. 14-SOIC package is offered by suppliers.
MM74HC4066MX Features
4 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MM74HC4066MX Applications
There are a lot of ON Semiconductor MM74HC4066MX Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- PDAs
- Power routing
- Avionics and Military Systems
- Public switching systems
- Audio and video routing
- Wireless Local Loop
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Communication systems
- Audio/video switches
