banner_page

MM74HC4066N

10ns, 30ns SPST - NO 70Ohm DUAL Analog Switches 14 Pins 20nA 4.5V 14-DIP (0.300, 7.62mm)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MM74HC4066N
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 738
  • Description: 10ns, 30ns SPST - NO 70Ohm DUAL Analog Switches 14 Pins 20nA 4.5V 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
Terminal Finish MATTE TIN
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT APPLICABLE
Number of Functions 4
Supply Voltage 4.5V
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) NOT APPLICABLE
Pin Count 14
Supply Voltage-Max (Vsup) 12V
Number of Channels 1
Number of Circuits 4
-3db Bandwidth 100MHz
On-State Resistance (Max) 70Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 42 dB
Current - Leakage (IS(off)) (Max) 20nA
On-state Resistance Match-Nom 10Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 10ns, 30ns
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -50dB @ 1MHz
Switch-on Time-Max 20ns
Switch-off Time-Max 36ns
Voltage - Supply, Single (V+) 2V~12V
Height Seated (Max) 5.08mm
Length 19.18mm
RoHS Status ROHS3 Compliant

MM74HC4066N Overview


As the electronic part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. Totally, there are 14 terminations. A 1 channel electronic part produces high-quality output. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 14 pins. The analog switch ics are built using SPST - NO switching circuits. A total of 4 circuits make up this switch device. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply.

MM74HC4066N Features


1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz

MM74HC4066N Applications


There are a lot of Rochester Electronics, LLC MM74HC4066N Analog Switches & Multiplexers ICs applications.

  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Battery-powered systems
  • Cell phones
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • DSLAMs
  • Battery Powered Systems
  • Multiplexers
  • PCMCIA cards
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Fiber In The Loop (FITL)

Write a review

Note: HTML is not translated!
    Bad           Good