MM74HC4316M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Resistance | 70Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4316 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Max Supply Current | 2μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 205 ns |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 265 ns |
| Max Dual Supply Voltage | 6V |
| Number of Gates | 4 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 14ns, 20ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4316M Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. The analog switch ics are built using SPST - NO switching circuits. Use 74HC4316 to search for variants of the digital switches. Analog switches have 70Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 6V. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 2V should be applied to the electronic component. If put voltage greater than 2μA on the device, damage may be caused to the analogue multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. If you are using dual power supplies, you should attach at least 1V.
MM74HC4316M Features
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MM74HC4316M Applications
There are a lot of ON Semiconductor MM74HC4316M Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Sample-and-hold systems
- Industrial and process control systems
- Transmit
- Digital cross connects (DSX-1)
- Ultrasound
- Switching Systems
- Modems
- Precision test equipment
- Relay replacements
