MM74HC4316MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 70Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4316 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 500mW |
| Max Supply Current | 2μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 205 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 265 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 14ns, 20ns |
| Channel-to-Channel Matching (ΔRon) | 5Ohm |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC4316MX Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. A electrical component with 4 channels is capable of high-quality output. The analog switch ics are built using SPST - NO switching circuits. There are 4 circuits in this multiplexer. Try searching for 74HC4316 variants of the analog switch ic. This digital multiplexer has 70Ohm internal resistance. Please refer to the datasheets for 16 pins functions. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. A voltage higher than 2μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using dual power supplies, you should attach at least 1V. A 4 input needs to be operated. In an environment with a temperature higher than 85°C, the digital switches should not operate. The analogue multiplexer has 4 outputs. There is a 16-SOIC package offered by suppliers.
MM74HC4316MX Features
4 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MM74HC4316MX Applications
There are a lot of ON Semiconductor MM74HC4316MX Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Industrial control systems
- Communication systems
- Imaging
- PBXs
- Fiber In The Loop (FITL)
- Remote wireless modules
- Intelligent PBX
- MP3 players
- SDH
