banner_page

MM74HC573MTC

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC573 DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MM74HC573MTC
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 135
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC573 DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 191mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2005
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 4.5V
Terminal Pitch 0.65mm
Base Part Number 74HC573
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 35mA
Number of Bits 8
Propagation Delay 225 ns
Quiescent Current 8μA
Turn On Delay Time 15 ns
Family HC/UH
Logic Function D-Type, Latch
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Number of Input Lines 3
Independent Circuits 1
Height 900μm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MM74HC573MTC Overview


In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A package of Tube has been used. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 2V~6V voltage supply is required for operation. A temperature of -40°C~85°C is set as the operating temperature. The 74HC series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. 74HC573 is the family name of it. The device is operated when the supply voltage is set to 4.5V. It is a member of the HC/UH family of electronic devices. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. A total of 2/6V power supplies are required for it to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. With an output current of 35mA, it is highly flexible in terms of design. Aquiescent current is consumed by 8μA without being affected by external forces.

MM74HC573MTC Features


20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC573 family
20 pins
2/6V power supplies

MM74HC573MTC Applications


There are a lot of ON Semiconductor MM74HC573MTC Latches applications.

  • Storage
  • Registers
  • Shift left with parallel loading
  • Instrumentation
  • A/D and D/A conversion
  • General-Purpose Register
  • Digital bus buffer
  • Multi-line decoders
  • Decade counting
  • Motor Drives

Write a review

Note: HTML is not translated!
    Bad           Good