MM74HC573N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.26g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC573 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Gates | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 26.075mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC573N Overview
A package called 20-DIP (0.300, 7.62mm) contains it. A Tube package is used to package it. In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. The 74HC series contains FPGAs of this type. 8 Bits are used in the design of this electronic part. This device has 20 terminations. This type belongs to the 74HC573 family. The supply voltage of the device is 5V. This electronic device is categorized as a HC/UH electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Through Hole is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. 6V is the maximum voltage (Vsup) that can be supplied. A supply voltage (Vsup) greater than 2V is required. With 7.8mA, maximum design flexibility is ensured. Input lines are converted into binary equivalents by 3 output lines.
MM74HC573N Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC573 family
20 pins
MM74HC573N Applications
There are a lot of ON Semiconductor MM74HC573N Latches applications.
- Meter applications
- Four-bit storage with output enable
- Automotive ADAS
- Shift left with parallel loading
- Serial Input
- Address register
- Multistage ripple counting
- Hammer Device Information
- Network Switches
- Accumulator Registers
