MM74HC573SJX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC573 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC573SJX Overview
The package in which it is embedded is named 20-SOIC (0.209, 5.30mm Width). As a result, it has a packaging of Tape & Reel (TR). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. A voltage of 2V~6V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74HC series contains FPGAs of this type. The electronic part in this image has 8 bits. A device such as this has 20 terminations designed. It belongs to 74HC573 family. A 4.5V voltage supply is required for operation. There is a device in this electronic family called HC/UH. 20 pins are used in its design. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. The part is in the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 6V. A total of 2/6V power supplies are needed to run it. A supply voltage (Vsup) greater than 2V is required. There are 3 input lines in which electronic circuits are present. Based on its reliable performance, this device is suitable for TAPE AND REEL. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them.
MM74HC573SJX Features
20-SOIC (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC573 family
20 pins
2/6V power supplies
MM74HC573SJX Applications
There are a lot of ON Semiconductor MM74HC573SJX Latches applications.
- Parallel data storage
- Flip-flops
- Phase comparator
- Parallel-to-Serial Data Conversion
- Pattern generators
- Storage
- Frequency
- Display driver
- Motor Drives
- Parallel Input
