MM74HC574N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.26g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Output Current | 7.8mA |
| Clock Frequency | 35MHz |
| Propagation Delay | 155 ns |
| Turn On Delay Time | 18 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC574N Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). It is included in the package Tube. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 35MHz Hz. A total of 1elements are present in it. T flip flop consumes 8μA quiescent energy. D latch belongs to the 74HC574 family. JK flip flop input capacitance is 5pF farads. It is mounted in the way of Through Hole. There are 20pins on it. In this device, the clock edge trigger type is Positive Edge. Its flexibility is enhanced by 8 circuits. As a result of its output current of 7.8mA, it is very flexible in terms of design. There are 3 output lines on it.
MM74HC574N Features
Tube package
74HC series
20 pins
MM74HC574N Applications
There are a lot of ON Semiconductor MM74HC574N Flip Flops applications.
- Memory
- Event Detectors
- ESCC
- CMOS Process
- Common Clocks
- Divide a clock signal by 2 or 4
- Shift Registers
- Reduced system switching noise
- Consumer
- Clock pulse
