MM74HC574WMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 2.5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Voltage | 6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 155 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 18 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 2.34mm |
| Length | 12.8mm |
| Width | 7.47mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC574WMX Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74HC series. Its output frequency should not exceed 35MHz. In total, it contains 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74HC574 family. It is powered from a supply voltage of 4.5V. A JK flip flop with a 5pFfarad input capacitance is used here. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 8. As a result of its reliability, this D flip flop is ideally suited for TR. A total of 2ports are embedded in the D flip flop. For high efficiency, the supply voltage should be kept at 2.5V. In order for the chip to function, it has 3output lines. It consumes 8μA of quiescent current without being affected by external factors. A total of 8 channels are available.
MM74HC574WMX Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
MM74HC574WMX Applications
There are a lot of ON Semiconductor MM74HC574WMX Flip Flops applications.
- Data Synchronizers
- Counters
- ESCC
- Storage registers
- ESD performance
- QML qualified product
- Pattern generators
- Differential Individual
- Digital electronics systems
- 2 – Bit synchronous counter
