MM74HC74AMTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 94MHz |
| Propagation Delay | 40 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC74AMTCX Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. There is a Differentialoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 2V~6V. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 94MHzshould be the maximum output frequency. Currently, there are 14 terminations. This D latch belongs to the family of 74HC74. A voltage of 4.5V is used to power it. This JK flip flop has a 5pFfarad input capacitance. Devices in the HC/UHfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. With an output current of 5.2mA, it is possible to design the device in any way you want. It operates with 1 output lines. Quiescent current is consumed by the D latch in the amount of 4μA. Currently, there are 2 channels available.
MM74HC74AMTCX Features
Tape & Reel (TR) package
74HC series
14 pins
MM74HC74AMTCX Applications
There are a lot of ON Semiconductor MM74HC74AMTCX Flip Flops applications.
- ESCC
- Storage Registers
- Frequency Dividers
- Frequency Divider circuits
- CMOS Process
- Common Clocks
- Single Down Count-Control Line
- Balanced 24 mA output drivers
- Digital electronics systems
- Bus hold
