MM74HC74AN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 94MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
MM74HC74AN Overview
The package is in the form of 14-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. In the configuration, Differentialis used as the output. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The supply voltage is set to 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. The 74HCseries comprises this type of FPGA. It should not exceed 94MHzin terms of its output frequency. In total, it contains 2 elements. T flip flop consumes 4μA quiescent energy. The number of terminations is 14. Power is provided by a 4.5V supply. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the HC/UHfamily of D flip flop. In this case, the maximum supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V.
MM74HC74AN Features
Tube package
74HC series
MM74HC74AN Applications
There are a lot of Rochester Electronics, LLC MM74HC74AN Flip Flops applications.
- Storage Registers
- Counters
- Buffered Clock
- Data transfer
- Data storage
- Differential Individual
- Frequency Divider circuits
- Event Detectors
- Common Clocks
- Consumer
