MM74HC74AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 1.62g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74HC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Output Current | 5.2mA |
| Clock Frequency | 94MHz |
| Propagation Delay | 110 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC74AN Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. There is a Differentialoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Through Hole. With a supply voltage of 2V~6V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 94MHz. T flip flop consumes 4μA quiescent energy. There are 14 terminations,It is a member of the 74HC74 family. A voltage of 5V provides power to the D latch. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the HC/UHfamily of D flip flop. The electronic part is mounted in the way of Through Hole. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 2 circuits. The output current of 5.2mA makes it feature maximum design flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
MM74HC74AN Features
Tube package
74HC series
14 pins
MM74HC74AN Applications
There are a lot of ON Semiconductor MM74HC74AN Flip Flops applications.
- Clock pulse
- Balanced 24 mA output drivers
- Memory
- Load Control
- Bus hold
- Reduced system switching noise
- Consumer
- Asynchronous counter
- Frequency Divider circuits
- Supports Live Insertion
